15 Best LED Tube Lights Reviews 2023 | For Home or Garage

best led tube lights

Upgrading from fluorescent to LED is never a bad idea. However, before you buy the exact LED products that you need, you’d have to do a brief, thorough analysis.

best led tube lights

So that you don’t end up buying something that does not suit your needs.

So, here we have compiled a list of the best-LED tube lights available in the market.

Buyer’s Guide

To buy the right tube light, you will have to study a few features before you proceed to analyze the different products that are available in the market.

Due to that purpose, we have compiled a buyer’s guide for you.

Lumens

The number of lumens determines the brightness of the light. A lumen is a unit of measurement for the intensity of light that any light generates. The more the number of lumens, the brighter the light will be.

For homes, a tube light with a lumen count of 1600 would do. But for offices, it needs to be at least 2000.

Wattage

The wattage of light determines how much electricity it will be consuming, to deliver the lumens. The more the wattage, the higher your bill will be. For 1600 lumens, a 20-watt bulb will be enough.

The tube lights meant for domestic uses should deliver 85 lumens per watt, and the ones meant for office should deliver 100 lumens per watt.

Temperature

There are different colors offered by different LED lights, and their color is determined by their temperature.

It is measured in Kelvins. The warm yellow light that is supposed to provide a soothing environment is 3000k.

Moving up, we have bright white and blue light that is 5000k or above. The white, common daylight, starts from 6500k.

Extra Accessories

The more accessories and functions you want, the more you’d have to invest. For example, some tube lights come with dimmers so that you can adjust the brightness.

Sometimes, there are also remote controlled lights or the ones that can be connected to Bluetooth or wifi. They are more expensive than standard ones.

Top 15 LED Tube Lights Reviews

After studying the basic features, you can now move on to the list of the best products available in the open market.

Below, there is a list of best products that I have compiled after intense research.

1. Barrina LED Tube Light

As the name says, this light is very appropriate for shops and professional spaces. That is because it is very bright.

The lumen output is 8500 lumens. And for 120 watts. The light goes to every corner of the place.

Every LED light has the power consumption of 72 watts, so you will be able to save 70% on your electricity bills if you replace your fluorescent tubes with these. They are easy to install, you can plug them in any fixture.

They let you wire five lights in one series so that you can save up on wiring. The color temperature they offer is 5000k, which is daylight white. And no harmful radiation too.

More photo & price on amazon.com

Pros:

  • Super bright
  • No flickers
  • No harmful radiation
  • High output

Cons:

  • Clear glass so glare
  • Not dimmable
  • Not remote controlled

2. PARMIDA LED Tube Light

You can install these lights, whether you have a ballast or not. Which means they can be installed as the primary fixture, as well as a replacement for incandescent bulbs.

If you have a ballast, they will be 20 watts, and if you don’t have a ballast, they will be 18 watts.

They can be connected from either one end or both ends. This is another feature that adds up to its versatility.

The original shunted sockets are called tombstones. You can install these directly into them.

No need to remove them to fit these. They have frosted glass and are impact resistant.

More photo & price on amazon.com

Pros:

  • Frosted glass so no glare
  • Can be installed with or without ballast
  • Single and double-ended connection
  • Shatterproof
  • Installed directly in tombstones

Cons:

  • Need non shunted tombstones
  • Not as bright with ballast

3. Hyperikon T8 LED Tube Light

These 4 feet LED tubes will give you 133 lumens for one watt. And combined, the lumen count that you will get will be 2400.

They have a wide beam angle, which is 220 degrees. You will not need to replace your lighting over and over again once you have fitted these lights in your house.

These lights have an 82+ color rendering index, which means you will get a near daylight experience. Their temperature is 5000K.

They are powered from a single end, and you need a ballast for them. The installation process is easy.

More photo & price on amazon.com

Pros:

  • Crystal white glow
  • Near daylight experience
  • Wide beam angle
  • Low wattage

Cons:

  • Require ballast
  • Clear glass causes glare

4. Parmida LED T8 Tube Light

You will be able to install this tube light simply by bypassing your ballast.

If you do that, you will be able to save yourself money and time, because ballasts tend to fail over time. They also consume a lot of electrical power.

The installation process is very simple with this one. The lights can be installed into the tombstones directly, with no need for extra, tiresome installation procedures.

This tube will let you have the single end, or the double-ended connection as well, whatever suits you. The shatterproof glass allows impact resistance.

More photo & price on amazon.com

Pros:

  • Shatterproof
  • Frosted glass
  • Single and dual-ended connection
  • Ballast bypass

Cons:

  • Less wide beam angle
  • Can’t be used with ballast

5. JESLED T8 LED Tube Light

With these tube lights, you will have an energy-efficient solution for your lighting needs.

They will give you the maximum output by using the minimum wattage and lowest heat output. The tubes are made out of shatterproof materials.

You can use them with almost any light fixture there is. You will not need a ballet for it.

The uses of them are highly versatile; you can use these for domestic as well as for commercial use.

The lights offer 3000 lumens. You can replace them easily with your fluorescent bulbs.

More photo & price on amazon.com

Pros:

  • Low heat output
  • Ballast bypass
  • Bright
  • Lasts long

Cons:

  • Only dual end powered
  • Can’t be used in damp locations

6. Sunco Lighting LED Tube Light

Switching to LED from fluorescent has never been easier! You can install these tubes in five minutes only, whether you have experience or not.

They will only use 18 watts of your electricity and provide the output of a 40-watt fluorescent bulb.

The color temperature is a comfortable 5000k, which will fulfill all your brightness needs.

The number of lumens this tube has to offer is a solid 2000. Which means it is very appropriate for commercial use, and also for domestic use if you are looking for a near daylight kind of illumination.

More photo & price on amazon.com

Pros:

  • Frosted glass reduces glare
  • Very bright
  • Comfortable for eyes
  • Five-minute installation process
  • Adjustable light direction

Cons:

  • Single-sided connection only
  • Instruction manual isn’t very clear

7. SHOPLED 8FT LED Tube Light

As the name says, if you are looking for the best way to illuminate your shop, then this is what you should go for.

One tube light is eight feet so that you will save yourself the hassle of wiring and installation of many fixtures.

The color temperature is 6000k, so it gives off a cool white color. You can link one lamp to the other, the maximum number of lamps that you can link together is 4.

You will need no ballasts for this. The number of lumens is 7200.

More photo & price on amazon.com

Pros:

  • Super bright
  • Lightweight
  • Linkable
  • Saves energy

Cons:

  • Clear glass so glare is there
  • Not dimmable
  • Does not include plug cords

8. CNSUNWAY LIGHTING LED Tube Light

These bulbs will offer you 100-110 lumens per watt, which is quite an efficient amount of lumens for any kind of use. This way, the wattage used will be less as well.

You can fit these lights in almost any fixture; they are compatible with t8, t11 and t12 fixtures. All you need to do is that you will have to bypass the ballast first.

The power consumption and the thermal output will stay low. So you will get cheaper, brighter, and healthier lighting solutions.

And the steel housing is durable and rugged.

More photo & price on amazon.com

Pros:

  • Compatible with light fixtures
  • High lumen per watt count
  • Low power consumption
  • Durable

Cons:

  • Only double ended
  • Doesn’t work with dimmer or ballasts

9. JOMITOP 8FT LED Tube Light

These lights offer a decent replacement for the fluorescent tubes for conventional uses.

They have a wide range of applications and can be used for residential, commercial, and professional uses. They have a wide beam angle of 270 degrees.

The clear cover gives the light more brightness, unlike a frosted cover, which devours most of the light.

The led lights give off 120 lumens per watt, and in total, they are 7800 lumens. You can save 65% on your electricity bills with this thing.

More photo & price on amazon.com

Pros:

  • Wide beam angle
  • V-shaped led designs
  • Double brightness
  • High lumen per watt count

Cons:

  • Nondimmable
  • Clear cover and glare

10. JOMITOP V Shaped LED Tube Light

Another good product by JOMITOP, only this time, the tube lights are eight feet.

This means you will be able to save yourself time and money, as well as hassle, by avoiding more wiring on more products. Use one eight-foot bulb instead of two-four feet ones.

They have the brightness of 7800 lumens, and the temperature of 5000k. You will be able to install it easily and save up to 65% on your electricity bill.

They can be used indoors as well as outdoors. But do not bring in direct contact with water.

More photo & price on amazon.com

Pros:

  • Indoor and outdoor use
  • Works in harsh conditions
  • V-shaped design
  • Can be used as plant growing lighting

Cons:

  • Not too bright

11. Kihung LED Tube Light

These integrated fixtures are capable of lighting almost any work area, rest areas, commercial areas, or residences.

Cut the costs of your electricity bill and opt for cleaner and healthier lighting solutions by replacing your fluorescent bulbs with kihung ones.

These lights have two rows of LEDs; they keep the brightness maximum while keeping the heat minimum. You can connect four lights together.

They have a large beam angle to offer, up to 270 degrees. The installation process is easy, just plug and go.

The snap joints are included, so you can just insert the plug, it’ll light up.

More photo & price on amazon.com

Pros:

  • V-shaped design
  • Two rows of led lights
  • Wide beam angle
  • Linkable
  • Lightweight

Cons:

  • LEDs have individual spots
  • Wiring will need modification

12. LUMINOSUM T8 LED Tube Light

By switching to luminous, you can avoid the fatigue, heat, and bills caused by fluorescent bulbs. Save up to 50% of your billing with these lights.

They light the place up with as much as 4000+ lumens, by only using 40 watts. They have a long lifespan, and the bill will never go up.

Dual-end powered, and they can be fitted with almost any light fixture. Just get a simple ballast bypass, and you will be able to install them. Not a lot of rewiring will be required.

More photo & price on amazon.com

Pros:

  • High lumen count
  • Saves energy
  • Require less rewiring

Cons:

  • Not UL certified

13. HYPERIKON T8 4 Foot LED Tube Light

These HYPERIKON led lights are going to offer you a total lumen count of 2140, and 118 lumens per watt.

The beam angle that it’ll give you is 140 degrees. The life span is also more, saving you a lot of money.

It has been approved by the UL, so it will end up providing a healthier solution that the other lighting options.

It is safe for the eyes, as well as healthy because it does not emit any harmful radiation.

The installation process is also easy; you can I stall them directly. And if you are installing them in the place of a fluorescent bulb, then a simple ballast bypass would be needed.

More photo & price on amazon.com

Pros:

  • 80% bill reduction
  • Compatible
  • More lumens per watt
  • UL listed

Cons:

  • Only single end connection
  • Less beam angle

14. ROMWISH 2FT LED Tube Light

This product offers you a total lumen count of 1120 lumens, which means brightness is ensured. The color temperature is 6000k.

The beam angle is 120 degrees, so individual spots of the led lights will not be an issue. Their cover is transparent, so the brightness will not be affected, unlike a frosted cover, in which the brightness is hindered.

The power it’ll consume is just 8 watts. Which means you will be able to save heftily on the electricity bills.

The bulbs are dual-end powered; they can be installed easily, with no need for a ballast.

More photo & price on amazon.com

Pros:

  • Very low wattage consumption
  • Low heat output
  • Long lifespan
  • Wide applications

Cons:

  • Narrow beam angle
  • Only dual-powered

15. Superior Lighting 4FT LED Tube Light

Last product of the list. The superior lighting products will not disappoint you in terms of beam distribution; you will never spot individual led spotlights.

They are highly shatterproof because of their thermoplastic cover. The beam angle is 240 degrees. Their color temperature is 4000k and 5000k.

You will get up to 150 lumens per watt. They will not flicker or buzz; instead, they only take a second to switch on.

They will last you more than 45000 hours. Reduce your electricity bills by replacing your fluorescent bulbs with these.

More photo & price on amazon.com

Pros:

  • High lumen per watt count
  • No sound
  • Switch on instantly
  • Wide beam angle

Cons:

  • None

Frequently Asked Questions

Do LED tube lights need a ballast?

A ballast is a device that is used for the regulation of electric current in the fluorescent tubes. This electrical component is only meant for the fluorescent tubes.

The LED tubes, however, do not require one. This is because the LED ones are powered by the household wording directly.

Can I put LED lights in fluorescent light?

LEDs are the cost-efficient replacement for fluorescent bulbs. Most of the time, you can reuse the fluorescent fixture by putting an LED into it. And other times, you will need minor rewiring.

The LED lights can be used with a ballast, but it is better to remove it because it will only take up more energy.

How many lumens is a 4-foot T8 bulb?

In a 4 foot T8 fluorescent bulb, there will be 2850 lumens per bulb. Which means 11,400 lumens for the entire thing.

Are LED tubes brighter than fluorescent?

LED tubes are not only brighter, but they also don’t flicker like fluorescent bulbs. The LED lights also help you save money.

Do LED tubes need starters?

The whole idea behind LED lights is that they save money by not needing starters and ballasts.

But there are also those LED lights that can be placed inside fluorescent fixtures, the fixtures that are already attached to starters.

Those LED lights need starters to avoid rewiring.

Is LED tube light harmful to the eyes?

Generally, LEDs are less harmful and dangerous than fluorescent bulbs.

But, if your eyes are exposed to the LED lights for a lifetime, then there is a chance of macular degeneration that is age-related.

Which is better, LED, or tube light?

The LED light is better than a tube light because it lasts way longer. It is known to last approximately 40,000 more hours than the tube light. It will also help you save tons of energy.

The LED lights are environmentally friendly as well.

Can led tube light to be repaired?

The traditional incandescent bulbs cannot be repaired. Not at all. However, in an LED tube light, you can replace almost anything.

All you need to do is pinpoint the malfunction, and then fix it, to prolong the life of your bulbs.

How much watt LED bulb is required for a room?

Mostly, it depends upon if you need more brightness or less.

For an average living space that is 250 square feet, you will have to use at least 5000 lumens for just the primary light.

This is equal to five CFLs of 23 watts, five incandescent bulbs of 100 watts, or eight LED light bulbs of 10 watts.

What is inside an LED tube light?

There are many LED lights inside an LED tube light. They are all arranged in a row, and they run on either 110 or 220 volts.

Conclusion

There you go, you have all the information necessary to upgrade to LED tube lights.

We’ve ensured that you don’t have to get in the hassle of reading multiple customer reviews or scouting multiple sellers on Amazon.

This comprehensive guide would help you choose the best-LED tube light that falls into your budget and requirements.

Read Also:

Written By
More from Mark Jarvis
10 Most LED Lights Advantages and Disadvantages | Think Twice!
All technology that you see around you has its own advantages and...
Read More
Leave a comment

Your email address will not be published. Required fields are marked *